Chlor preparations are being applied for water disinfection for years as most efficient and most economical means. The method of disinfection itself is appropriate, does not need high skill or big installs. One of the most efficient ways of adding chlor is by automatic dosing pumps.

     Those are the impulse membrane dosing pumps with electronic pane by which mode of operation and chlor concentration are defined. On the control panel there are signalizations: on/off, liquid level, impulse, mode of operation and dose counter. Mostly there are two types of pumps:

Automatic dosing pump with impulse flow line meter that works on the principle of the signals from the impulse counter – Certain amount of water that passes through the impulse flow line meter gives the signal to the pump that given amount of chlor inserts into the grid via suction valve.

2. Automatic dosing pump that signal for start receives from the propulsion pump – When pump in the well is activated, it gives signal to the dosing pump that automatically doses chlor into the grid. When pump in the well is turned off, dosing pump is turned off, too.

Semi automatic dosing pump Automatic dosing pump with impulse flow